Optcore-10G-SFP+ – 1.4KM

USD$23.50

Optcore’s OSP10G-311DxR is a high performance and cost-effective 10GBASE-LR lite SFP+ transceiver module for
10 Gigabit Ethernet links up to 1.4km over single mode fiber.

In stock

SKU: STI-OSP10G-311DCR Category:

Description

The transceiver features a highly reliable 1310nm FP
transmitter and PIN photo-detector into duplex LC optical connector. It complies with SFP+ MSA specifications
(SFF-8431, SFF-8432), 10 Gigabit Ethernet specifications (10GBASE-LR/LW per IEEE 802.3ae ), and 10G Fibre
Channel (1200-SM-LL-L). It’s suitable for use in 10G Ethernet switches, routers, network interface cards (NICs), fiber
media converters and storage networking equipment. Additionally, the 10GBASE-LR lite SFP+ 2km transceiver has been integrated with an enhanced digital diagnostic
monitoring interface (DDMI) per SFF-8472, which provides real-time monitoring of the transceiver temperature, laser
bias current, optical power, received optical power and transceiver supply voltage. All transceivers are Class 1 laser
products comply with FDA/CDRH and IEC-60825 standards. There are three versions of the series 10GBASE-LR lite SFP+ 2km transceiver for different applications. The Standard
grade (0~70ºC) is for commonly commercial application, the Extended grade (-10~85ºC) is for Extended temperature
application, and the Industrial grade (-40~85ºC) is made with robust and reliable components to meet the needs of
Industrial Ethernet application under harsh environmental conditions.

Features

  • Supports up to 10.7Gbps bit rates
  • Hot-pluggable SFP+ footprint
  • Compliant with SFP+ MSA and SFF-8472
  • 1310nm FP laser, PIN photodiode
  • Distance up to 2km transmission on SMF
  • Duplex LC connector
  • Built-in digital diagnostic functions
  • Single +3.3V power supply
  • Metal enclosure,for lower EMI
  • ROHS compliant and lead-free
  • Operating Temperature: Standard 0~70ºC, Extended -10~85ºC, Industrial -40~85ºC

Absolute Maximum Ratings

Parameter Symbol Min Max Unit Notes
Maximum Supply Voltage Vcc -0.5 4.5 V
Storage Temperature TS -40 85 °C
Operating Humidity RH 5 85 %

Recommended Operating Conditions

Parameter Symbol Min. Typ. Max. Unit Notes
Power Supply Voltage Vcc 3.13 3.3 3.47 V
Power Supply Current Icc 290 mA
Case Operating Temperature Tc 0 70 °C Standard
-10 85 °C Extended
-40 85 °C Industrial
Data Rate 10.3 10.7 Gbps
Maximum Link Length LMAX 10 km

Optical Characteristics

Parameter Symbol Min Typical Max Unit Notes
Transmitter
Centre Wavelength λc 1270 1310 1350 nm
Spectral Width( -20dB) Δλ 4 nm
Side-Mode Suppression Ratio SMSR 30 dB
Average Output Power Pout -8.2 0 dBm 1
Extinction Ratio ER 3.5 dB
Data Input Swing Differential VIN 180 850 mV 2
Input Differential Impedance ZIN 90 100 110 Ω

 

– 3 – https://www.optcore.net

TX Disable Disable 2.0 Vcc V
Enable 0 0.8 V
TX Fault Fault 2.0 Vcc V
Normal 0 0.8 V
Receiver
Centre Wavelength λc 1260 1600 nm
Receiver Sensitivity -14.4 dBm 3
Receiver Overload 0.5 dBm 3
LOS De-Assert LOSD -16 dBm
LOS Assert LOSA -30 dBm
LOS Hysteresis 0.5 dB
Data Output Swing Differential Vout 300 900 mV 4
LOS High 2.0 Vcc V
Low 0.8 V

Note :
1. The optical power is launched into SMF.
2. PECL input, internally AC-coupled and terminated.
3. Measured with a PRBS 231-1 test pattern @10312Mbps, BER ≤1×10-12.
4. Internally AC-coupled.
Timing and Electrical

Parameter Symbol Min Typical Max Unit
Tx Disable Negate Time t_on 1 ms
Tx Disable Assert Time t_off 10 µs
Time To Initialize, including Reset of Tx Fault t_init 300 ms
Tx Fault Assert Time t_fault 100 µs
Tx Disable To Reset t_reset 10 µs
LOS Assert Time t_loss_on 100 µs
LOS De-assert Time t_loss_off 100 µs
Serial ID Clock Rate f_serial_clock 100 400 KHz
MOD_DEF (0:2)-High VH 2 Vcc V
MOD_DEF (0:2)-Low VL 0.8 V

Diagnostics

Parameter Range Unit Accuracy Calibration
Temperature 0 to +70 °C ±3°C Internal
-10 to +85
-40 to +85
Voltage 3.0 to 3.6 V ±3% Internal

 

Additional information

Weight 0.2 kg
Dimensions 10 × 6 × 3 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.